Home Page

Products

Corporate Info

Contact Us
 

The Iconix Autodraft Controller connects to the 25 pin Optional I/O connector on the FX21 and FX41 weighing indicators. Drafting direction signals are sent to the controller by the indicator, and the controller directs air as required to actuators that open the required gates.

There is a pressure switch input that may be used to automatically trigger the weighing process, equivalent to pressing the WEIGH key on the indicator.

Features

• Controls gates for 3 way drafting.
• Pressure switch input allowing automatic weigh cycle initiation.
• Internal buzzer to indicate weigh cycle is complete.